T-plus

TT-204

Achieve an authentic stone appearance with the convenience of resin. Warm and rich, our translucent materials are easier to work with than natural stone, opening up the possibilities. Alabaster is a one-sided product. As a handmade engineered stone, full sheets of this material may vary in color and pattern from panel to panel, from sample to actual panel, and when back lit.

Introduction

Introduction

Products Description

Specification

	Dimension	Tolerance
Length	2440mm	±3mm
Width	1220mm	±3mm
Thickness	10mm	±1mm
Squareness	2728mm	±4mm

1) Quality

1-1) Quality Control

We are committed to be positive & aggressive in our attitude towards quality and customer service. We will not allow quality to take second place behind cost or schedule as this is our basic strategy for growth.

* Inclusions: No more than two (2) pits, inclusions, contaminants, voids or bubbles at a maximum diameter of 1.5 mm allowed on a 1220mm X 2440mm sheet.

* All sheets are to be covered with protective masking.

* Surface: No more than two (2) scratches, scuffs, streaks, irregularity, or texture flaws at a maximum length of 3 mm allowed on a 1220mm X 2440mm sheet. Surface damage will be evidenced by damages in protective masking.

* Top material surface is to be planed and smooth with no evidence of machine lines.

* Bottom material surface is permitted to be course with machine patterns.

* Aesthetics: Bubbles or white spots: Must be limited to 50mm in diameter to any single area on a sheet Only two (2) bubble or white spot areas are permitted per sheet. No single color within a shipped order may contain more than 10% of sheets with bubbles or white spots – even if the above specifications per sheet are maintained.

* Flatness: No more than 3 mm of bowing from the center of the panel to any exterior edge.

* Chips/Cracks: No chips or cracks on the corners or edges of the panel are tolerable.

2) Colors

2-1) Standard Colors

Our color options are available as many as you can imagine.

2-2) Customized colors

Any colors & patterns of Natural stone & Artificial stone are both available for us to match, feel free to let us know your ideas/designs/printed papers or send us your original samples, we will make things happen.

3）Fabrication

Our resin panels may be cut with traditional wood or plastic cutting tools(band saws, circular saws or jig saws). When cutting with a panel or table saw a carbide tipped triple-chip blade is recommended. When drilling the panels, be sure to use a backing support or chipping may result. Also, drilling should be done at least 2 inches (50 mm) from any edge to prevent edge cracking.

Application

Certifications

Company Profile

Packing

FAQ

1. Can I get the small samples before I place the order?

Sure, the samll samples are always available, you can try to select your desired colors.

2. Can I cut the size by mysellf?

Yes, our resin panels may be cut with traditional wood or plastic cutting tools(band saws, circular saws or jig saws). When cutting with a panel or table saw a carbide tipped triple-chip blade is recommended.

3. Do you have other bigger size?

Yes, but it depends on the colors. Like our TA-225, it’s available to make a 2900*1500mm sheet, but our TA-901 can’t.

4. Do you offer the light together?

We only offer the acrylic LED panels for the light source, but you can try to order the LED strips/ladderlites/acrylic LED panels in your local market.

5. Can I use the alabaster sheet for the exterior project?

We don’t recommend to use our alabaster sheet for the outdoor project, but you can try a few darker alabaster colors or our acrylic D range for the exterior project.